Powerware 9125 Manuel d'utilisateur télécharger pdf (Page 21)

INSTALLATION

EATON Powerware

9125 Two-in-One EBM (700–2000 VA) User’s Guide S 05146489 Rev D www.powerware.com

NOTE The EBMs must be installed below the UPS as shown in Figure 2.

5. Slide the EBMs into the rack.

6. Secure the cabinets to the rack according to the rail kit instructions.

UPS

EBMs

Figure 2. Rack-Mount UPS with EBMs

7. Plug the EBM cable(s) into the battery connector(s) as shown in

Figure 3. Up to four EBMs may be connected to the UPS.

8. Follow the installation instructions in the Powerware 9125

Two-in-One UPS (700–2000 VA) User’s Guide for installing the UPS.

NOTE The batteries charge to 80% capacity in approximately 2 hours. However, it is

recommended that the batteries charge for 36 hours after installation or long-term storage.

NOTE If you installed power management software and EBMs, ensure maximum battery

runtime by using the ERM configurator tool on the Software Suite CD.

UPS Battery

Connector

EBM Cable

UPS

EBM

EBM Battery Connectors

Figure 3. Rack-Mount EBM Connections (120V Model Shown)

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 29 30

Pas de commentaire

Powerware 9125 Manuel d'utilisateur Page 21